LDP2 Antonine Wall Supplementary Guidance
Frontiers of the Roman Empire (Antonine Wall) World Heritage Site
Introduction
Who is this Guidance For?
This Supplementary Guidance provides advice for developers, decision makers and the public on managing the impact of development on the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site (FRE(AW)WHS) and its setting. The Guidance will be a material consideration in the assessment and determination of planning applications affecting the Antonine Wall and its setting.
Purpose of Supplementary Guidance
The purpose of this SG is to:
- Explain the significance of the Antonine Wall and its status as a World Heritage Site;
- Encourage early and effective consultation with the Council and Historic Environment Scotland;
- Outline the approach and procedure for assessing development affecting the World Heritage Site;
- Set out the criteria which will be applied in determining planning applications for development along the line of, and within the setting and vicinity of the World Heritage Site; and
- Guide decisions on planning appeals and enforcement.
The Antonine Wall
The Antonine Wall is the most substantial and important Roman monument in Scotland. Built on the orders of the Emperor Antoninus Pius in the years following 140 AD, it extends for some 60 km across central Scotland from Bo’ness on the River Forth to Old Kilpatrick on the River Clyde and marked the north western frontier of the Roman Empire.
The Wall functioned both as a frontier control and military defence. It comprised of a substantial turf rampart built on a solid stone base fronted to the north by a broad, deep ditch and outer mound. To the south of the rampart was a road, the Military Way, which permitted the movement of troops, goods and materials and connected the series of permanent stone built forts which occur at roughly two mile intervals along its length. Between some of the forts there are smaller forts, or fortlets. Camps used by the troops building the Wall also occur at regular distances along the frontier.
The headquarters building at Bar Hill Fort , Twechar
The Antonine Wall is of great significance for a number of reasons. It represents one of many sections of a massive military system which stretched over 5000 km from northern Britain, through Europe to the Black Sea, and from there to the Red Sea and across North Africa to the Atlantic coast. This frontier helped to protect and define the Roman Empire, one of the greatest states ever to have existed. The Antonine Wall was the most northerly frontier of the Empire, the last of a series of planned frontiers built in the 2nd Century AD and, at the time, the most complex ever constructed by the Romans.
Today around one third of the Antonine Wall survives is visible above ground, at places such as Bearsden, Bar Hill and Rough Castle. Around one third lies in urban areas while the remainder lies in open countryside or open spaces within urban areas and, though not visible above ground, survives below ground. Only 2 km of the original 60 km of the Antonine Wall have been completely lost through quarrying and the construction of roads, railways and the Forth and Clyde Canal. The Wall continues to be subject to considerable development pressures and given its significance it is imperative that the remaining sections, whether visible on the ground or not, are safeguarded from inappropriate development.
The bath house at Bar Hill Fort , Twechar
The Frontiers of the Roman Empire (Antonine Wall) World Heritage Site - FRE(AW)WHS
In July 2008 the international cultural and archaeological importance of the Antonine Wall was recognised when the World Heritage Committee of UNESCO inscribed the site as Scotland’s fifth World Heritage Site (WHS). The Antonine Wall became an extension of the trans-national Frontiers of the Roman Empire World Heritage Site which includes Hadrian’s Wall in England and the Upper Raetian German Limes. The intention is that the WHS will eventually include all surviving sections of the frontiers of the Romans in Europe, Africa and the Middle East.
With World Heritage Site status comes a commitment to protect the exceptional cultural significance of the Antonine Wall and Outstanding Universal Values (OUV) for which the site was inscribed. The Statement of Outstanding Universal Value, provided at Appendix 1 , not only identifies the reasons for the Wall’s inscription as a World Heritage Site but provides the basis for its effective protection and management.
It is imperative that development does not compromise the values for which the Antonine Wall was inscribed as a World Heritage Site, its authenticity and integrity.
Buffer Zone
To protect the important landscape setting of the Antonine Wall a Buffer Zone has been designated to the north and south of the monument. The Buffer Zone does not act as an absolute barrier to development but defines a zone where added protection to the immediate setting of the World Heritage Site is given. Development proposals within the buffer zone will be given careful consideration to determine whether it is likely to significantly detract from the Outstanding Universal Value authenticity or integrity of the Antonine Wall World Heritage Site.
Assessing the Impact of Development provides further guidance on Buffer Zones and the setting of the Antonine Wall. The boundaries of the World Heritage Site and the Buffer Zone in East Dunbartonshire are shown below, as well as on the East Dunbartonshire Local Development Plan 2 Proposals Map .
Antonine Wall (Scheduled Areas) & Buffer Zone
Protecting the Wall
World Heritage Site designation does not result in additional direct legal protection. Nevertheless, the Antonine Wall is protected through the planning system and in some areas through designation as a Scheduled Monument.
National Planning Framework (NPF4)
National Planning Framework 4 (NPF4) acknowledges the importance of World Heritage Site and that the impact of proposed development upon the outstanding universal value, including its authenticity and integrity of a World Heritage Site and its setting, is a material consideration in determining planning applications. The Historic Environment Policy for Scotland (HEPS) sets out the Scottish Government's policies for the historic environment and provides policy direction.
Planning Advice Note (PAN) 2/2011: Planning and Archaeology and the Managing Change in the Historic Environment guidance notes complete a suite of documents that together set out Scottish Government’s policies for planning and the historic environment.
Development Plan Policy
Decisions on planning applications require to be made in accordance with the development plan unless material considerations indicate otherwise. East Dunbartonshire Local Development Plan 2 includes policies to protect and enhance the historic environment and archaeology. National planning policy on the historic environment is also a material consideration for applications. This document provides additional guidance and information on the implementation of these policies in the development management process.
The planning policy on the Antonine Wall and its buffer zone set out in East Dunbartonshire LDP2 is as follows:
LDP2 Policy 19 WH1 Frontiers of the Roman Empire (Antonine Wall) World Heritage Site and HE1 Buffer Zone
A. There will be a presumption against development which would have an adverse impact on the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site as defined on the Proposals Map.
B. There will be a presumption against development within the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site buffer zones which would have an adverse impact on the Site and its setting, unless:
- mitigating action to the satisfaction of the Council in consultation with Historic Environment Scotland can be taken to redress the adverse impact, and
- there is no conflict with other Local Development Plan policies.
In addition to protection under planning legalisation, about two-thirds of the Wall which has remained unaffected by modern development, is scheduled as a monument of national importance under the Ancient Monuments and Archaeological Areas Act 1979 . Most works carried out within the boundaries of the monument require Scheduled Monument Consent (SMC): the prior written consent of Historic Environment Scotland. SMC is separate from planning consent and one can be given without prejudice to the other. Scheduled Monument Consent provides more information.
Key Points
- This document provides advice for decision makers, developers and members of the public on managing the impact of development on the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site and its setting;
- The SG is a material consideration in the assessment and determination of planning applications affecting the Antonine Wall and its settings and will be adopted as statutory Supplementary Guidance, which forms part of the Local Development Plan;
- The Antonine Wall is of international significance. As a World Heritage Site its outstanding universal value, authenticity and integrity must be protected;
- There is a presumption against development which would have an adverse impact on the Antonine Wall and its setting.
Application Process
Introduction
This section provides guidance on key stages in the process of applying for planning permission where a proposed development may have an impact on the FRE(AW)WHS or its setting. It also identifies where other permissions or assessments may be required, for example Scheduled Monument consent from Historic Environment Scotland.
Site Audit
Developers considering proposals within the WHS and Buffer Zone should look carefully at their site to determine whether the development proposed is likely to have an impact on the fabric or setting of the Antonine Wall. Table 1 below outlines some of the key information that will influence whether proposals have an adverse impact, and should be discussed with the Council at the pre-application stage. Adverse impacts are examined further in Assessing the Impact of Development .
Table 1. Site Audit - Key Questions
It is emphasised that the general principle of new development at any specific location may be deemed unacceptable because of other policies in the development plan. For example green belt, open space and countryside protection policies may rule out the principle of particular types of development or land use.
Pre-Application Discussions
Developers will be expected, as early as possible, to engage with the Council in pre-application discussions. Contact details for the East Dunbartonshire Development Applications Team are provided in Useful Contacts .
Early, positive and meaningful engagement will allow unacceptable proposals to be identified before significant costs are incurred and allow other projects to move forward more efficiently. Using Table 1 above as a basis, along with any available plans, drawings, photographs or photomontages and documentation, developers should aim to provide the Council with as much information as possible relating to the proposed development and the site.
With suitable information the Council will be able to make a preliminary assessment of the proposal, considering relevant development plan policies and the potential for adverse impacts on the WHS and its setting. Discussions may also cover:
- Any additional information required, for example detailed archaeological investigations, landscape assessments etc;
- Where a proposal might be amended to allow more favourable consideration (see Design & Mitigating Impacts );
- The Council’s procedure for processing applications, including key contacts and application fees (including any advertisement charges);
- Where wider consultation is required with specialist archaeological services, statutory organisations and other interest groups. This may also involve statutory Pre-Application Consultation; and
- Advice on other relevant statutory processes, e.g. Listed Building/Conservation Area Consents, Scheduled Monument Consent.
In many circumstances, only full applications for Planning Permission will be acceptable for sites within the WHS and Buffer Zone. Applications for Planning Permission in Principle often cannot provide sufficient information to enable detailed assessment of impacts on the WHS or its setting. Where Planning Permission in Principle is sought, the reasons for this should be discussed with the Council at this pre-application stage.
All discussions and pre-application advice is given without prejudice to the final decision of the Council on any application that may be submitted.
Environmental Impact Assessment
Certain types of developments may require Environmental Impact Assessment (EIA) under the The Town and Country Planning (Environmental Impact Assessment) (Scotland) Regulations 2017 . Schedule 1 and 2 of the Regulations set out the types of development to which this applies. This can be discussed during pre-application discussions. This can be discussed during pre-application discussions and further information is provided at Physical Impact within the Buffer Zone.
Scheduled Monument Consent
Any works directly affecting a designated Scheduled Monument requires Scheduled Monument Consent (SMC) which is obtained from Historic Environment Scotland. SMC is required for any works or operations that would ‘ demolish, destroy, remove, repair, alter or add to’ those parts of the FRE(AW)WHS designated a scheduled monument. This includes invasive archaeological investigations. Applications for SMC are made directly to Historic Environment Scotland.
Advice on the SMC process and requirements should be sought at an early stage from the Heritage Directorate, Historic Environment Scotland. As in the case of planning applications, early pre-application contact, this time with Historic Environment Scotland, is strongly advised. To streamline the process advice on applications for planning permission and SMC should be sought at the same time. Where both planning permission and SMC are required, development cannot proceed without both consents in place. The annex to PAN 2/2011 provides a flowchart outlining the consideration of archaeology in planning decisions and will be applicable to applications affecting the Antonine Wall regardless of the need for SMC.
The presumption of scheduling is that any future works will be the minimum necessary consistent with the preservation of the monument. The Historic Environment Scotland website and the HEPS includes further information on scheduling and SMC and can be used to identify the location of Scheduled Monuments: see Appendix 3 .
Permitted Development & Other Consents
Development that does not require planning permission, for example householder development within urban areas, where the Wall is known to have survived under the modern-day ground surface, has the potential to have adverse impacts without any assessment or appropriate mitigation. Developers and property owners are strongly urged to seek advice from the Council before undertaking any works within the WHS or Buffer Zone to determine whether their proposal is covered by permitted development rights and to discuss potential impacts.
SMC will still be required for permitted development that does fall within the boundaries of the Scheduled Monument.
It is the responsibility of the developer to ensure all necessary consents, including Building Warrants, Conservation Area Consent and Listed Building Consent, are obtained.
Key Points
- Understand your development site. What are the potential impacts of the proposal on the WHS and its setting? Please see the search function within the Antonine Wall (Scheduled Areas) & Buffer Zone map to locate your site;
- Developers are expected to engage with the Council as early as possible;
- Unconnected to the need for planning permission, Scheduled Monument Consent is required for works to any part of the FRE(AW)WHS designated a scheduled monument.
Assessing the Impact of Development
Background
This section of the SG provides information on the Council’s approach to assessing the potential impacts of development on the Antonine Wall WHS and its setting, including the criteria that will be used.
Development must not compromise the Outstanding Universal Value for which the Antonine Wall was inscribed as a WHS. The key consideration in assessing the impact of development, as outlined in the development plan, is the presumption against development which would have an adverse impact on the Antonine Wall and its setting; that is any impact that would damage the integrity, authenticity, significance or understanding of the WHS. Examples of what could be considered adverse include development that:
- Destroys or would lead to the damage of archaeological remains;
- Interrupts key views to, from, or within the WHS
- Changes the character of the landscape in and around the WHS;
- Reduces people’s appreciation or understanding of the WHS in its landscape setting;
- Could negatively affect any of the qualities or significance for which the WHS was inscribed.
Impacts may be physical: upon the fabric of the monument; on the setting of the wall: development that harms the character of the landscape around the WHS; or cumulative: development that has the potential to add to the existing negative effects of past or current developments thereby creating further and possibly greater adverse effects. This section considers each category of impact in turn and other factors that will be considered in assessing the impact of development.
Physical Impacts
Within the FRE(AW)WHS new development of any scale is likely to have a physical effect on the fabric of the monument and could result in loss of or damage to significant archaeological remains. Such impacts intrinsically affect the integrity of the site, one of the reasons for which it was inscribed as a WHS. Therefore any physical impact on the surviving fabric of the WHS, whether upstanding or below ground, will be considered to be adverse.
Where sections of the WHS have previously been developed the fabric of the Antonine Wall may have already been compromised. In these areas the key consideration in determining if a proposal would have an adverse physical impact will be whether the new development will result in additional loss or damage to archaeological remains. As an initial guide, the current depth of development on a site sets a sub-ground limit, known as the Vertical Buffer Zone, below which no excavation should take place (see Figure 1). The Vertical Buffer Zone may include complex archaeological deposits, with features relating to other periods of history, and site investigations to determine the Vertical Buffer Zone may themselves have adverse impacts.
Carefully located and designed proposals on previously developed sites that do not extend below the Vertical Buffer Zone may, therefore, be acceptable in certain circumstances, provided they do not conflict with other planning policies. Pre-application advice should be sought to scope out potential archaeological impacts of any proposal, particularly those impacts which may extend beyond the WHS and its associated features.
Figure 1
Development should avoid areas of surviving archaeological remains. Avoiding the World Heritage Site and, in particular areas which are scheduled will be the best approach. Even in areas which have already been developed, the presence, location, depth and sensitivity of deposits cannot always be predicted. In many instances it may be appropriate to carry out an archaeological evaluation to help determine where Roman deposits lie ahead of making a planning application. This may help to design proposals which avoid areas of archaeological deposits.
For smaller developments where surviving Roman deposits are assessed as being improbable, an archaeological watching brief and mitigation strategy may be more appropriate, this should be discussed with the local authority and Historic Environment Scotland at an early stage. Moving development outwith the WHS will not automatically avoid physical impact. Although not covered by the WHS, impacts upon archaeological deposits from other periods will not always be acceptable and should also be considered as part of the development planning process.
Proposals should also consider potential long-term impacts arising from development, for example through compression and hydrological impacts.
To properly inform the design and assessment process (including pre application discussions) it is essential that any new development site overlying the boundaries of the WHS is, at the outset and at the developer’s expense, the subject of a detailed archaeological investigation undertaken by a suitably qualified professional. The Chartered Institute for Archaeologists list of Registered Organisations is a good starting point for selecting a consultant.
Physical Impact within the Buffer Zone
There may be sub-surface archaeological deposits within or outwith the defined buffer zone, outwith the line of the World Heritage Site, or Scheduled areas. This is because the exact line of the Wall is not clear, and new elements may be discovered during site works. Where known archaeological remains are present, investigation will be required in conjunction with new development. Where previously unknown archaeological deposits are identified during site works the Council should be informed immediately and further archaeological investigations may be required.
Key Points
- Any physical impact on the surviving fabric of the WHS, whether upstanding or below ground, known or previously unrecognised, will not be permitted. This refers to both Scheduled Monument and unscheduled sections of the WHS.
- Proposals on previously developed sites that do not extend below the Vertical Buffer Zone may be acceptable in certain circumstances.
- Detailed archaeological investigations will be required to accompany any proposals for development within the boundaries of the WHS.
- Where the extent or presence of archaeological remains is unclear, pre-determination evaluation will be required.
Impacts on Setting
The Antonine Wall was not constructed in isolation. It was deliberately positioned with reference to the surrounding topography, resources and landscape of central Scotland, notably the southern edge of the valley formed by the Rivers Kelvin and Carron, a position that offered the Wall wide-ranging views over the Kilsyth Hills, the Campsie Fells, and Kilpatrick Hills and meant that it too was widely visible in the landscape. The setting of the FRE(AW)WHS is predominately well preserved and readily perceptible and it is this relationship with the landscape that is a fundamental part of what makes the WHS so significant and contributes to how it is experienced, understood and appreciated; its outstanding universal value which must be protected.
The Buffer Zone has been defined to ensure that all proposals for development within it are considered carefully as they may have the potential to affect the WHS; the adjacent environment that it is part of, and which contributes to the character, significance and understanding of the Wall. The capacity for new development in the Buffer Zone varies significantly along the length of the WHS and while the Council does not seek to prevent change to the landscape within the Buffer Zone, it is considered essential that new development is effectively accommodated within the landscape and is designed and located to conserve and enhance the setting of the WHS. This also applies to developments out with the Buffer Zone that may have an impact by virtue of their scale or visual relationship with the Antonine Wall.
Development in the Buffer Zone
LDP2 Policy 19 WH1 and HE1 (B) presumes against development within the buffer zone which would have an adverse impact on the WHS and its setting, unless mitigating action to the satisfaction of the Council in consultation with Historic Environment Scotland can be taken to redress the adverse impact. Design & Mitigating Impacts covers potential mitigation action, however, it should be noted that in many instances it will not be possible to mitigate the adverse impact of a proposed development upon the AW(FRE)WHS. Adverse impacts will be defined as those which could affect the following criteria:
A. The authenticity and integrity of the setting, e.g.:
- Changes to the prominence/dominance of the WHS in the landscape;
- Obstruction of views to and from the WHS;
- Changes in the overall preservation of the landscape setting.
B. The significance of the setting, e.g.:
- How the function and meaning of the WHS relates to the landscape;
- How the WHS is understood and can be appreciated in the landscape;
- Relationships between components of the WHS and related sites.
C. The character of the landscape in which the WHS sits, including the contribution the WHS makes to wider landscape character.
D. The quality of the wider landscape.
Additional information on the Buffer Zone; how it was defined and its key characteristics can be found in the Nomination Document and the report ‘Definitions of Buffer Zones to the World Heritage Site’. Historic Environment Scotland has also produced advice on Managing Change in the Historic Environment (see Appendix 4 ). These documents will be a material consideration in the determination of proposals and their possible impacts.
Development affecting the wider landscape setting of the World Heritage Site
In addition to the defined Buffer Zone it may be necessary to consider potential impacts of new development outside the Buffer Zone on longer distance views to and from significant landscape features, notably the upland edge of the Campsie Fells and Kilpatrick Hills, which play an important part in the appreciation and significance of the WHS. Most development beyond the Buffer Zone will not have an adverse effect on the setting of the WHS or its setting, however, major development in particular has the potential to detract from or damage longer distance views to and from the Site. The criteria for judging whether impacts on wider setting can be considered ‘adverse’ are broadly the same as those outlined above.
Within built up areas, parts of the WHS, particularly the Scheduled Monument, may also have a setting which will require to be determined on a site by site basis.
Key Points
- There will be a presumption against development within the Buffer Zone which would have an adverse impact on the WHS and its setting;
- The Criteria set out above will be applied in the assessment of what is an adverse impact on the setting of the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site.
Cumulative Impacts
New development will be assessed on its own merits. However, there are potential instances where development impacts, acceptable in isolation, combine to create adverse cumulative impacts on the WHS. These may be physical, where a series of developments have resulted in significant losses of archaeological material, or affect the setting of the WHS, where a sequence of new developments erodes visual connections with the landscape. Councils will therefore consider the potential for new development to create, add to or set a precedent for adverse cumulative impacts. Such consideration will include:
- What developments or types of development, in the vicinity of the proposed site have adversely affected the integrity of the WHS in the past?
- What ongoing activities, developments or natural processes are affecting its physical condition and survival, and the integrity of its setting?
- What other developments are proposed in the short-to-medium-term that are likely to contribute to adverse effects on the WHS?
- Whether the impact of the proposed development is likely to contribute to cumulative effects generated by the above?
Adding Value
Where development would not have an adverse impact on the Antonine Wall and its setting, proposals should seek to make a positive contribution to the conservation, management and understanding of the WHS and its setting. Sympathetic, high-quality design of development can have the potential to add value by enhancing the character of the WHS and its setting; promoting improved access, (including by public transport), to, and interpretation of the site; and contributing to a wider appreciation and understanding of the WHS in its landscape context. Opportunities should be identified early in the planning process. Pre-application discussions with the Council and the archaeology service will assist in drawing out suitable ideas which can be implemented through the development process.
Reproduction of the Eastermains Stone , Twechar
Other Planning Policies & Assessments
In addition to the impact of proposed development upon the WHS and its setting, applications for planning permission will also be considered against relevant policies in the Council’s Development Plan, other Supplementary Guidance and NPF4. Details can be viewed online or can be seen, and discussed, at the appropriate Council offices.
Environmental Impact Assessment
Schedules 1 and 2 of the Town and Country Planning (EIA) (Scotland) Regulations 2017 set out the types of development likely to have significant impacts on the environment and which are required to undergo Environmental Impact Assessment. Both Scheduled Monuments and World Heritage Sites are defined as ‘sensitive areas’ under the Regulations. Where any proposed Schedule 2 development falls within a Scheduled Monuments or WHS and is likely to have ‘significant environmental effects,’ an Environmental Impact Assessment is required (Schedule 1 development always requires EIA). This includes any type of development that would ordinarily have permitted development rights, but is located within the sensitive area/is above the thresholds set out in the Regulations.
EIA development that falls within the Scheduled Area will also require Scheduled Monument Consent. Planning Circular 1/2017 provides further information on the EIA Regulations.
Key Points
- The Council may advise developers to demonstrate they have given due consideration to the cumulative impact of their development on the Antonine Wall and its setting.
Design & Mitigating Impacts
Introduction
The purpose of this section is to outline the general design principles for new development within the WHS and Buffer Zone.
A core principle of the modernised planning system is the focus on the quality of outcomes, taking account of the sustainable use of land, good design and the protection and enhancement of the built and natural environment. The international significance of the Antonine Wall means good quality design will be vital for any development on or near the WHS, including within the Buffer Zone and fundamental to the avoidance of any adverse impact.
Design Criteria
In the first instance, there is a presumption against development which would have an adverse impact on the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site and its setting. Key to the avoidance and minimisation of adverse impacts on the WHS will be good design which takes account of the following principles:
Careful site design
- Site selection should avoid the WHS, in particular those areas which are scheduled;
- Site selection within the Buffer Zone should avoid the most sensitive areas and avoid obstructing views to/from, and limiting existing access to the WHS;
- Prioritise previously developed sites, taking account of the ' Vertical Buffer Zone ’ and allowing, where possible, development to fit within existing settlement patterns.
Well considered development layout
Proposed development should seek to maximise the benefit of existing site features, especially topography and vegetation, to eliminate adverse visual impacts.
Appropriate building design
The characteristics of the site, landscape and local building styles should inform the form, massing, height and materials of new buildings, generating coherent, high quality solutions.
High quality landscape design
Landscaping, both hard and soft, should be as much part of the development process as the architecture. Well planned and executed design may enable development to be accommodated by the site and wider landscape and has the potential to reinforce existing landscape features and character. Additional landscaping can also impact on intervisibility between different parts of the WHS and it’s setting. It is therefore important that the location and specification of new landscaping is considered in relation to impact in the WHS and its setting.
Mitigation
LDP2 Policy 19 WH1 and HE1 (B) states there will be a presumption against development within the Buffer Zone which would have an adverse impact on the Site and its setting unless mitigating action to the satisfaction of the Council, in consultation with Historic Environment Scotland, can be taken to redress the adverse impact. Mitigation measures potentially reduce any identified impacts to an acceptable level. It is emphasised though that not all adverse impacts can be successfully mitigated. Impacts on the WHS and its setting should primarily be avoided through positive siting and design decisions in preference to the use of other mitigation measures.
Examples of mitigation may include landscaping proposals which are designed to reflect and strengthen local landscape character and the visual setting of the Antonine Wall. Mitigation measures however should not in themselves potentially generate adverse impacts.
Design matters and the potential for mitigation measures should be discussed at the pre-application stage, and appropriate reports submitted in support of any application demonstrating that discussions have been effectively incorporated in the finalised proposals. In the event that permission is granted suitable conditions and, if necessary, planning agreements will ensure the proper implementation of agreed mitigation measures.
Conditions will be used to ensure that development does not proceed before a programme for appropriate mitigation has been identified, or where archaeological recording has taken place. Conditions will ensure that safeguards are in place to protect important features. When imposing conditions, planning officers will consult with Historic Environment Scotland and/or Council’s Archaeologists to ensure that the proposed measures are proportionate, enforceable and effective in conserving OUV. Examples of suitable conditions might include landscaping and/or protective buffer zones around key in-situ sections of the wall.
Key Points
- All development within the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site and Buffer Zone will be expected to be of good design, demonstrating: careful site selection; well considered development layout; appropriate building design and materials; high quality landscape design;
- Mitigating action which redresses the adverse impact of development within the Buffer Zone may be acceptable but must be discussed in consultation with, and be to the satisfaction of, the Council and Historic Environment Scotland;
- Mitigation of adverse impacts will not be possible in all instances.
Enforcement
The unique trans-national nature of the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site means that damage to the Antonine Wall could affect the integrity and significance of the WHS as a whole, with international implications for Scotland.
The recognition of the WHS’s Outstanding Universal Value means the Antonine Wall requires the highest level of statutory protection. Loss or damage to upstanding archaeological remains and those buried beneath the ground will be treated as a particularly serious breach of regulatory controls. Other impacts of unauthorised development will be judged against the same guidance for new developments with respect to the effect on the character, integrity or significance of the World Heritage Site. Non-compliance with planning conditions or agreements may also result in significant adverse impacts.
Breaches of planning control will be investigated and if appropriate enforced by the Council, or in consultation with Historic Environment Scotland. In all cases it will be required that ongoing work cease with immediate effect, to allow a proper assessment of the impacts and prevent damage or loss once it is established that there is or has been a breach. In particular it may be considered appropriate to issue a temporary stop notice requiring an immediate halt to activity and allowing time for further enforcement action to be put in place to protect the site or archaeological remains. Full details of the enforcement powers available to planning authorities are set out in Planning Circular 10/2009: Planning Enforcement . Remedying the breach will take account of particular circumstances, but can include full site reinstatement. Non-compliance with enforcement or stop notices can also be prosecuted at the Sherriff Court.
Any person carrying out unauthorised works or allowing unauthorised works to be carried out on a Scheduled Monument without consent are guilty of an offence. Works are defined as: anything resulting in the demolition or destruction of a Scheduled Monument; any works for the purpose of removing or repairing a Scheduled Monument; or any flooding or tipping operations. The Historic Environment (Amendment) (Scotland) Act 2014 introduced new powers to enable Scottish Ministers to serve Scheduled Monument enforcement notices, complemented by temporary stop notices where unauthorised works are taking place on a Scheduled Monument. Further information on this is available on Historic Environment Scotland's website .
Key Points
- The Council will seek to protect the Outstanding Universal Value of the World Heritage Site through a robust approach to unauthorised development. The Statement of Outstanding Universal Value is the key reference for the future effective protection and management of the property;
- ICOMOS have prepared Guidance on Heritage Impact Assessments (HIA) for Cultural World Heritage (WH) Properties .
Useful Contacts
East Dunbartonshire Council
Development Applications Team Southbank House 1 Strathkelvin Place Kirkintilloch G66 1XQ
planning@eastdunbarton.gov.uk
0300 123 4510
Historic Environment Scotland
Planning, Consents & Advice Longmore House Salisbury Place Edinburgh EH9 1SH
HMconsultations@hes.scot
0131 668 8716
Appendices
Appendix 1: Statement of Outstanding Universal Values
The Statement of Outstanding Universal Value for the Frontiers of the Roman Empire (Antonine Wall) World Heritage Site as contained in the decision notice of the World Heritage Committee outlines the exceptional cultural significance of the Antonine Wall:
The Antonine Wall fully illustrates the effort of building the Limes on the frontiers of the Roman Empire, at the time of its apogee and greatest extension in the British Isles and worldwide (middle of the 2nd century AD). It embodies a high degree of expertise in the technical mastery of earthen defensive constructions, in the construction of a strategic system of forts and camps, and in the general military organisation of the Limes. The Antonine Wall also demonstrates the diffusion of the military and civil engineering of the Roman civilisation to the whole of Europe and the Mediterranean world.
The Antonine Wall meets three of the selection criteria for inscription as a World Heritage Site, (ii), (iii) and (iv):
(ii) The Antonine Wall is one of the significant elements of the Roman Limes present in Europe, The Middle East and North Africa. It exhibits important interchanges of human and cultural values at the time of the apogee of the Roman Empire;
(iii) The Antonine Wall bears testimony to the maximum extension of the Roman Empire, by the consolidation of its frontiers in the north of the British Isles, in the middle of the 2nd Century AD. The property illustrates the Roman Empire’s ambition to dominate the world in order to establish its law and way of life there in a long-term perspective;
(iv) The Antonine Wall is an outstanding example of the technological development of Roman military architecture and frontier defence.
Appendix 2: Summary of Key Points
- The Antonine Wall is of international significance. As a World Heritage Site (WHS) its outstanding universal value, authenticity and integrity must be protected.
- There is a presumption against development which would have an adverse impact on the Antonine Wall and its setting.
- Developers are expected to engage with the Council as early as possible.
- Any physical impact on the surviving fabric of the WHS, whether upstanding or below ground, known or previously unrecognised, will only be permitted in exceptional circumstances.
- All development within the WHS and Buffer Zone will be expected to be of good design, demonstrating: a) careful site selection; well considered development layout; b) sympathetic, high-quality building building; and c) landscape design and materials.
- Mitigating action which redresses the adverse impact of development within the Buffer Zone may be acceptable but must be discussed in consultation with, and be to the satisfaction of, the Council and Historic Environment Scotland.
- The Council and Historic Environment Scotland will seek to protect the Outstanding Universal Value of the WHS through a robust approach to unauthorised development.
Appendix 3: Glossary
Antonine Wall - The Roman Empire frontier system running across central Scotland from the Firth of Forth to the Clyde Estuary, constructed c AD 142 on the orders of the Emperor Antoninus Pius. Inscribed as part of the Frontiers of the Roman Empire World Heritage Site in July 2008.
Authenticity - Depending on the type of cultural heritage, and its cultural context, properties may be understood to meet the conditions of authenticity if their cultural values (as recognised in the nomination criteria proposed) are truthfully and credibly expressed through a variety of attributes including: form and design; materials and substance; use and function; traditions, techniques and management systems; location and setting; language, and other forms of intangible heritage; spirit and feeling; and other internal and external factors.
Buffer Zone - For the purposes of effective protection of the nominated property, a buffer zone is an area surrounding the nominated property which has complementary legal and/or customary restrictions placed on its use and development to give an added layer of protection to the property. This should include the immediate setting of the nominated property, important views and other areas or attributes that are functionally important as a support to the property and its protection. The area constituting the buffer zone should be determined in each case through appropriate mechanisms.
Environmental Impact Assessment (EIA) - Environmental Impact Assessment (EIA) is the process of assessing the likely environmental impacts of a proposal and identifying options to minimise environmental damage.
Frontiers of the Roman Empire - World Heritage Site composed of three walls in different parts of Europe - Antonine Wall, Hadrian’s Wall and German Limes forming part of the frontiers of the Roman Empire.
The Historic Environment Policy for Scotland - The HEPS sets out how Historic Environment Scotland fulfils its regulatory and advisory roles and how it expects others to interpret and implement Scottish Planning Policy. It is a material consideration in the Scottish planning system.
Integrity - Integrity is a measure of the wholeness and intactness of the natural and/or cultural heritage and its attributes. Examining the conditions of integrity, therefore requires assessing the extent to which the property: includes all elements necessary to express its Outstanding Universal Value; is of adequate size to ensure the complete representation of the features and processes which convey the property’s significance; suffers from adverse effects of development and/or neglect.
Outstanding Universal Value - Outstanding Universal Value means cultural and/or natural significance which is so exceptional as to transcend national boundaries and to be of common importance for present and future generations of all humanity. As such, the permanent protection of this heritage is of the highest importance to the international community as a whole. At the time of inscription of a property on the World Heritage List, the World Heritage Committee adopts a Statement of Outstanding Universal Value which will be the key reference for the future effective protection and management of the property.
Scheduled Monument - A nationally significant monument, building or site included in the Schedule of Monuments maintained by Historic Environment Scotland.
Setting - The way the surroundings of a historic asset or place contribute to how it is understood, appreciated and experienced.
World Heritage Site - World Heritage Sites are cultural and/or natural sites considered to be of ‘Outstanding Universal Value’, which have been inscribed on the World Heritage List by the World Heritage Committee.
Appendix 4: General Information & Development Plan
Definitions of Buffer Zones to the World Heritage Site (Land Use Consultants report for Historic Environment Scotland, July 2006) - available on request